viper 791xv antigrind

Home / the12volt's Install Bay / Car Security and Convenience / viper 791xv antigrind (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

pttjr

Member - Posts: 16

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 30, 2005

Location: United States

Posted: February 03, 2006 at 5:00 PM / IP Logged

Installing viper 791xv in 2005 Yukon Denali. Does anyone know if this vehicle has starter antigrind or do I have to hook it up thru 791xv? if not would I use the yellow igntion switch wire, cut it in half,connecting the green wire to the key side and the purple wire to the other side of the yellow starter side? thanks

Back to Top

catalin capota

Copper - Posts: 74

Joined: December 28, 2005

Location: British Columbia, Canada

Posted: February 03, 2006 at 6:26 PM / IP Logged

If you're going to do your own anti-grind you should be interrupting the starter wire with a relay.

If the Denali has an ignition system that you do not need to keep the key turned while cranking then it should already have anti-grind system built-in.

Back to Top

Search for other posts by catalin capota

cntrylvr79

Silver - Posts: 582

Joined: July 02, 2005

Location: United States

Posted: February 03, 2006 at 8:56 PM / IP Logged

YEah the truck has the built in anti grind. How ever you still might want to hook it up on the 791 since that is what disables the starter when the alarm is going off.

Cause I'm So white and nerdy...

First Class Certi-fried installer

Back to Top

catalin capota

Copper - Posts: 74

Joined: December 28, 2005

Location: British Columbia, Canada

Posted: February 03, 2006 at 9:55 PM / IP Logged

It won't do any good since the Denali's factory installed immobilizer is much better than the DEI normally closed starter kill.

Back to Top

pttjr

Member - Posts: 16

Joined: December 30, 2005

Location: United States

Posted: February 04, 2006 at 7:11 AM / IP Logged

Thanks for the reply! So then I wont need to connect the green wire only the purple,is that right? Thanks

Back to Top

wranglercory

Copper - Posts: 53

Joined: January 27, 2005

Location: United States

Posted: February 08, 2006 at 11:17 AM / IP Logged

I would use the anti grind on the unit .

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 791xv antigrind

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.