the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 mazda 3 door lock


Post ReplyPost New Topic
< Prev Topic Next Topic >
stephen0715 
Member - Posts: 15
Member spacespace
Joined: February 05, 2006
Posted: February 05, 2006 at 3:40 PM / IP Logged  
I install a  alram with central lock system in my 2004 Mazda 3. Every things seem ok except the door lock. I can only lock and unlock the driver's door only with the alram but not the rest of the doors. The other doors can only lock and unlock with the switch on the driver's door. Is the wiring problem? Anyone can help me solve this problem. Thanks!
redpeppers 
Silver - Posts: 483
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 24, 2005
Location: United States
Posted: February 06, 2006 at 12:50 AM / IP Logged  

whaT wire did u use to run the lock and unlock?

GREEN/ red

Lock is negative trigger thru an 1,000 ohm resistor.  Unlock is a straight negative trigger.  MUST use relays.

Where theres is a wire there's a way.
stephen0715 
Member - Posts: 15
Member spacespace
Joined: February 05, 2006
Posted: February 12, 2006 at 2:34 PM / IP Logged  

Thanks redpeppers!

Can you give some more information about the M3 wiring? My alram has 2 wires ,one is lock  output ,the other is unlock output. so how  does this two wires connect to the  "GREEN/ red"  wire in the M3? how to connect it with  an extra relay? Thanks!

sparkie 
Platinum - Posts: 2,061
Platinum spacespace
Joined: November 06, 2003
Location: Canada
Posted: February 12, 2006 at 2:51 PM / IP Logged  
Hook your unlock wire to the GREEN/ red wire in the car and to terminal #87 of a relay. Hook the lock wire of your remote starter to terminal #85, terminal #86 to a fused source of battery power (fuse at 5 amps), terminal #30 to one end of a 1000 ohm resistor and the other end to a good ground.
sparky
stephen0715 
Member - Posts: 15
Member spacespace
Joined: February 05, 2006
Posted: February 20, 2006 at 9:16 PM / IP Logged  
Thanks Redpepper, door lock works perfect now.Thanks again!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 11, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer