the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Older Pioneer Harnesses Colors?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Big Purds 
Silver - Posts: 574
Silver spacespace
Joined: November 25, 2002
Location: Canada
Posted: January 04, 2003 at 5:57 PM / IP Logged  

I have to do a re and re for a friend of mine, basically swapping a Sony that I installed for him out of his truck that he is selling and replacing it with an older Pioneer tape deck, model KEH-P4200...

I am trying to figure out the speaker colors out of the harness...

I have the following from L to R:

Black (solid) - Ground

Black / Wht stripe - ?

Gray / Red stripe - ?

Black / Green stripe - ?

Green / Red stripe - ?

Orange (solid)  - constant

Green (solid) - ?

blank

Gray (solid) - ?

Gray / Black stripe - ?

Red (solid) - ignition

Blue (solid) - remote

now, is that blank supposed to be blank, or has a wire been pulled out of the harness? and what do each of the other wires control as far as directionally (RF LF RR LR)?

any help would be greatly appreciated...I know some of you guys have been in this game long enough to know what these colors are...

thanks,

Big Purds

derl 
Member - Posts: 33
Member spacespace
Joined: December 21, 2002
Location: Georgia, United States
Posted: January 05, 2003 at 8:26 AM / IP Logged  
Here is the correct wiring for the older model pioneers:
Orange:      constant
Red:        ignition
Black:       ground
Blue:        remote turn-on
grey:        right front (+)
grey/black: right front (-)
green:       left front (+)
GREEN/ black: left front (-)
grey/red:    right rear (+)
BLACK/ grey: right rear (-)
GREEN/ red:   left rear (+)
BLACK/ green: left rear (-)
that is not a BLACK/ white wire you have it is actually grey. The empty slot in your harness is where the negative wire for the left front (-) should be. You need a new harness. Do not use the negative from another speaker wire in lieu of the one that is missing.
Hope this helps. You may want to try to go by a local shop. Sometimes you can pop a wire/connector out of another harness and snap it into the slot. Sometimes.
~~Derl~~
drummer_ga@hotmail.com
albags2002 
Member - Posts: 1
Member spacespace
Joined: January 26, 2003
Location: United Kingdom
Posted: January 26, 2003 at 2:57 PM / IP Logged  

Hi!

Well......  If it wasnt of use to him....  It was to me. I just bought a Pioneer DEH 345R from eBay without a manual, for use on my second (runaround) motor.

Any ideas where I can get a copy of the manual from? Quite happy to pay for the privilege, by whatever means!

Thanks a lot!

Al...   UK.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer