vizualogic screen goes white

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / vizualogic screen goes white (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Roveer

Member - Posts: 27

Joined: February 22, 2004

Location: United States

Posted: May 21, 2006 at 12:11 PM / IP Logged

I've got a 10.4 audiovox dropdown hooked to a audiovox vcp via the din connector.

I'm adding a vizualogics headrest system which has a video switch box which will drive 3 monitors via din. So I connected the two headrests to the control box, and connected the audiovox dropdown to the box, but when I turn on the audiovox dropdown one or both of the vizualogic screens go white and lose picture. turn off the audiovox and the headrest picture comes back. Any ideas on this one?

Thanks,

Roveer

Back to Top

Roveer

Member - Posts: 27

Joined: February 22, 2004

Location: United States

Posted: May 22, 2006 at 9:44 AM / IP Logged

I believe I've solved this problem by isolating the power that fed the VCP and the Vizualogic system. Since doing that I havent' seen the problem.

Roveer

Back to Top

Roveer

Member - Posts: 27

Joined: February 22, 2004

Location: United States

Posted: May 26, 2006 at 8:44 PM / IP Logged

Was running my headrest monitors tonight (ignition only, motor not running and after a few mintues they both went to white screen. Not what I wanted to see. Any ideas? Had been running them for over an hour last week (battery charger attached to car with no problem at all. Is this possibly related to voltage drop? My GMC is notorious for draining the battery on ignition.

Regards,

Roveer...

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

vizualogic screen goes white

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.