Organize Relays

Hello, I was wondering what you guys do to keep all the relays you use all pretty and organized... My stock relay box is now full and i have plenty of relays left to install... I dont like the way they look just hanging on the side of the firewall and I want them in a place where they can be easily replaced if needed... Any suggestions? Thanks, -Jason

I always liked using DEI 451Ms if I needed a lot of relays.  Most of the time you don't need a 30A relay, and you can get away with the smaller ones in the 451M.  The small box allows for easy, clean installation, and I've never seen one go bad that was installed properly (I have seem one go bad that was sitting in water).Kevin Pierson

do you have a link to their website by chance? Thank you!

I usually tape them together in a row like dei remote starter relay packs, i also use female spade terminals instead of prewired relay harnesses to make my own harnesses. I just jumper 12+ and ground over from one to the other, stays nice and clean. My rifle is my friend...