eclipse keyless entry

Home / the12volt's Install Bay / Car Security and Convenience / eclipse keyless entry (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stevenlusk

Member - Posts: 13

Joined: September 13, 2005

Posted: June 25, 2006 at 3:39 PM / IP Logged

got a 96 eclipse says it needs neg pulse for lock and unlock, do i need relays or will the alarms neg leads be enough to trigger it? if i need relays could some one help me out on the the wiring of the relays to get a neg output

Back to Top

jeryl

Member - Posts: 37

Joined: January 18, 2004

Posted: June 27, 2006 at 4:59 PM / IP Logged

u shouldnt need relays the keyless entry should have it built in... read the manual it should say... eclipse are typ b door locks so all they need is a ground to trigger lock/unlock... most keyless entries have it relays built in... so all u need is to tap in to the lock/unlock the two wires and that should be it

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

eclipse keyless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.