molding my own carbon fiber

yea so it wouldnt be that difficult to wrap like a center console peice like where the shifter is. that area. i can take it out and work on a table or something. what all materials do i need to just do that little project.

you need clear epoxy resin, carbon fiber, good scissors to cut the carbon, brushes, and patience.Nitrous is like a hot girl with an STD. You know you want to hit it, but you are scared of the consequences.

ok. trust me i got all the patients in the world. there is nothing to do around here so all i do i work on my car and.......work on my car. so as far as working with it. whats a quick version of a write up. so i lay the carbon mat down on the peice find a way to get it to stay. and spread some resin over it and paint it smooth then let it cure?

also... racingcomposites.net has some helpful stuff too, but they get very in depth with stuff and dont have alot of info on laying carbon by hand. apparently there is not a lot of us who do this by hand.Nitrous is like a hot girl with an STD. You know you want to hit it, but you are scared of the consequences.

civicdetailer wrote: Nitrous is like a hot girl with an STD. You know you want to hit it, but you are scared of the consequences.

ROTF LMAOI have not failed. I've just found 10,000 ways that won't work.

When you do not know what you are doing and what you are doing is the best -- that is inspiration.