240sa

Home / the12volt's Install Bay / Car Security and Convenience / 240sa (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

240sx_owner

Member - Posts: 2

Joined: January 13, 2003

Location: United States

Posted: January 13, 2003 at 12:02 PM / IP Logged

Installing a Sidewinder 6500esp on a 1992 240sx. I found the lock wire and I seen the diagram here. Do I need to use a diode with the relay? If so does anyone know what the value should be?

It's all fun and games still someone looses an eye

Back to Top

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: January 13, 2003 at 12:33 PM / IP Logged

here is all you need to do: Cut the ORANGE / Black wire, the doors should lock, then put one half of the wire to Pin 30 and the other half to Pin 87a, Pin 85 goes to your (-)lock output from your alarm and your (-)Unlock wire goes directly to the ORANGE / Black wire on either side of the relay. If you want to. You do not need a diode.

J Rilla

Owner/Installer

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

240sa

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.