Plastic roll type door

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Plastic roll type door (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Ctoh

Copper - Posts: 123

Joined: June 15, 2005

Posted: August 16, 2006 at 9:44 PM / IP Logged

do any of you guys know where to find a plastic "roll' type door, the type that will slide on a soft 90 degree elbow? i have an h2 customer that previously had his ac controls moved into the center floor console, hes tired of opening and closing the lid to adjust the ac and wants to have a slide type door...thanks for any help,,,

sprawl85

Copper - Posts: 204

Joined: March 15, 2006

Location: United States

Posted: August 18, 2006 at 11:31 PM / IP Logged

like a bread box?

fiberglass reminds me of peanut brittle... but fiberglass tastes better!

juniorxs

Member - Posts: 26

Joined: February 23, 2004

Location: United Kingdom

Posted: August 19, 2006 at 4:54 AM / IP Logged

Have a look at this, this is the sort of thing you are looking for, but on a pc case mod. look at this

killer sonata

Silver - Posts: 718

Joined: May 17, 2006

Posted: August 19, 2006 at 1:52 PM / IP Logged

i dont imagine that would be too hard to make. just a track with small thing ABS plastic rectangles with fabric glued to the back of them to hold them all together

Ctoh

Copper - Posts: 123

Joined: June 15, 2005

Posted: August 19, 2006 at 2:34 PM / IP Logged

sprawl85 wrote:

like a bread box?

Yes

Ctoh

Copper - Posts: 123

Joined: June 15, 2005

Posted: August 19, 2006 at 2:37 PM / IP Logged

juniorxs wrote:

Have a look at this, this is the sort of thing you are looking for, but on a pc case mod. look at this

Which part of that,,,I didn't see what I was needing but wanted to make sure I was seeing the right thread, thanks

crazyoldcougar

Copper - Posts: 185

Joined: March 03, 2006

Location: Canada

Posted: August 19, 2006 at 9:16 PM / IP Logged

on side note that is the most incredible Pc case i have ever seen...

Fiberglass Guru.

Search for other posts by crazyoldcougar

juniorxs

Member - Posts: 26

Joined: February 23, 2004

Location: United Kingdom

Posted: August 20, 2006 at 5:10 AM / IP Logged

CTOH wrote:

Which part of that,,,I didn't see what I was needing but wanted to make sure I was seeing the right thread, thanks

towards the bottom of the page it says blast door with a video clip, there's a touchcreen monitor with the type of door your after covering it

Melted Fabric

Silver - Posts: 509

Joined: October 24, 2003

Location: California, United States

Posted: August 22, 2006 at 5:22 PM / IP Logged

That is just ...crazy. Hell of a pc case. And get this, the whole thing is made out of pancake batter.....

nah, just kidding Plastic roll type door -- posted image.

I have not failed. I've just found 10,000 ways that won't work.

When you do not know what you are doing and what you are doing is the best -- that is inspiration.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Plastic roll type door

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.