remote starter, mg rover 25 x reg

hi everyone

i have a mg rover 25  x reg. i have recently got a remote start alarm system and now am fitting it, on the alarm unit it has three relays with 2x brown 1x red 1x blue and 1x yellow to go to ignition switch but the rover has 4 wires from the ignition switch not even the same colours, can anyone please tell me where to connect the wires

is there anyone that can help im stuck with cut wires in my ignition switch,

need to take kids to school , i have a car on rent that has to go back soon what will i do then

is there any kind person that can help me,

will be most gratefull

what year is your car and what brand and model number of remote start are you useing?

it is 2001 rover 25 and the remote starter is an aolin model 838r it has three relays with it

thank u shaggy12volt

i have the ignition key switch out and there are 4 wires coming from it . how can i tell which one is which

what do i check with the meter

thanks 2 every reply given

ok so i reconnect switch and then with a voltmeter neg to car body (ground) and pos to ignition switch wires try to find acc, on & crank

then where can i connect the 5 wires from remote start how do i check them

2x brown, 1x blue, 1x yellow, 1x red thay all come from three relays

thank u 4 reply Hymer