97 tahoe remote start problems.

Home / the12volt's Install Bay / Car Security and Convenience / 97 tahoe remote start problems. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tculbert

Member - Posts: 6

Joined: December 18, 2002

Location: United States

Posted: January 21, 2003 at 7:55 AM / IP Logged

I just installed an autopage remote starter on my 97 tahoe. Everything works fine until I remote start the vehicle and leave it running. It will run for about 5 minutes and then blow a fuse in one of the power wires.

Can anyone help with this problem???

The remote starter has to power wires coming out of the main harness. they are both fused. Only one of them blows. I have them wired to the 2 +12V constants in the ignition harness. One to each constant +12V.

themagicone

Silver - Posts: 325

Joined: October 01, 2002

Location: United States

Posted: January 21, 2003 at 8:26 AM / IP Logged

Well have you tried moving one of the power wires to the other hot wire in the main harness? There should be two so put a power wire on each and see what happens

tculbert

Member - Posts: 6

Joined: December 18, 2002

Location: United States

Posted: January 21, 2003 at 8:31 AM / IP Logged

I currently have a power wire on each hot wire.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97 tahoe remote start problems.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.