2004 ford E350 door locks

I just installed a remote starter and alarm in the van. I can not figure out how the dam door locks work. I took the door apart and I am still not sure. Do I need to use relays for them? I had read conflicting advise about the door locks. Please help Thanks John

with factrory keyless entry they are negatives, without they are five wire. For test use pasenger side switch(master switch)Eng.Luis D.Cardona

There is no factory keyless in this van.

Thats mean is five wire locks and master switch is in the pasenger side switchEng.Luis D.Cardona

I removed the switch from the door and looked at the power lock switch. There are 5 wires to it. I then removed the kick panel and found lots of wires down there. So you are telling me is that I need to wire them up 5 Wire Alternating 12 Volts Positive Door Locks. Using 2 relays?

Yes, you would use this diagram for 5-wire reversal. DEI lists the locks as: Power Lock      red to ORANGE / black       5wi      either kick, door harness       Power Unlock      brown to yellow/red       5wi      either kick, door harness and has this note: FORD, ECONOLINE, 2004, Power Lock Use the passenger door lock switch when metering the wires, as it is the master switch. On vehicles with remote keyless entry, use pink / YELLOW (-) for lock and pink/lt. green (-) for unlock in either kick or at the VSM in the passenger kick. Hope this helps.

Ok got it to work. I used 2 relays and it works fine. Thanks

That is correct.Tacomacrew