Factory OEM alarm disarm 2003 VW

Home / the12volt's Install Bay / Car Security and Convenience / Factory OEM alarm disarm 2003 VW (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Bmlime

Member - Posts: 23

Joined: January 12, 2003

Location: United States

Posted: January 25, 2003 at 11:32 AM / IP Logged

I have a 2003 VW jetta 1.8 turbo.This is the scenario: I have a 550 esp and I arm it.I go to disarm it after 5 seconds.The viper disarms but the factory alarm stays armed the doors will not unlock.But if I disarm the alarm within 5 seconds the alarm disarms both OEM and viper and doors unlock. If it is remote started the alarms will disarm and doors will unlock. My installer said that the system sleeps after 5 seconds"the oem".Any suggestions would be helpful!!

bmlime

themagicone

Silver - Posts: 325

Joined: October 01, 2002

Location: United States

Posted: January 25, 2003 at 12:08 PM / IP Logged

Still looking for that info? Tell ya what, call up your VW dealer and try to get them to give you a diagram of the alarm wiring then email it to me and I'll take a look at to see if i can find out what to do. Also, see if you can find a haynes or chiltons manual, anything with factory wiring diagrams.

Bmlime

Member - Posts: 23

Joined: January 12, 2003

Location: United States

Posted: January 25, 2003 at 12:35 PM / IP Logged

I'm still looking.....I think I need to put in a relay do disable the factory alarm so my doors will unlock or vise versa.Any suggestions on the relay and how to wire that..

bmlime

themagicone

Silver - Posts: 325

Joined: October 01, 2002

Location: United States

Posted: January 25, 2003 at 1:54 PM / IP Logged

Have you tried the double pulse on the viper? If that dosent do it, what you can do it check the wries at the factory alarm moudle and find one the goes 12vlts or ground with you turn the key in the door to unlock and wire a realy to that to disarm the alarm.

Bmlime

Member - Posts: 23

Joined: January 12, 2003

Location: United States

Posted: January 25, 2003 at 2:26 PM / IP Logged

It is double Pulsed.How would the relay wire diagram look like

bmlime

themagicone

Silver - Posts: 325

Joined: October 01, 2002

Location: United States

Posted: January 25, 2003 at 11:21 PM / IP Logged

Well on the viper, there should be a 2 pin orannge plug. One of the wires should be lt. GREEN/ black

85 12vlts

86 LT. Green black from alarm

30 ethier to 12vlt or ground, depending on if the wire goes 12vlts or ground when you turn the key in the door to unlock

87a not used

87 to the wire that is changes to ground or 12vlt when key is turned

Bmlime

Member - Posts: 23

Joined: January 12, 2003

Location: United States

Posted: January 26, 2003 at 2:05 PM / IP Logged

OK I'll pass the info on to my installer and hope that he finds the problem

bmlime

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Factory OEM alarm disarm 2003 VW

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.