alarm/remote start, 99 chrysler lhs

Home / the12volt's Install Bay / Car Security and Convenience / alarm/remote start, 99 chrysler lhs (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: January 27, 2007 at 5:04 PM / IP Logged

take a jumper wire and put one end on a positive source (battery)then put the other end on the ignition wire(cut away a small part of the insulation).It helps to have alligator clips on the end of the jumper wire.

Back to Top

playboy00786

Member - Posts: 33

Joined: January 15, 2005

Location: United States

Posted: January 27, 2007 at 6:07 PM / IP Logged

is a jumper wire a special wire or just a wire the same gauge as the ignition wire?

Back to Top

au5599

Copper - Posts: 94

Joined: December 22, 2005

Location: United States

Posted: January 27, 2007 at 7:19 PM / IP Logged

hook up the remote start. Now when you go to programn the interface use a decent thickness wire. Jump on your connector for the remote start the ignition and to the 12 volt power.

Street Dreams Car Club

93 GRAND CARAVAN SE / Astro

Team New York SS3-4 06 & SM3-4 07 DB Drag World Finals

2003 Chevy Suburban LT / 98 GTP

Back to Top

playboy00786

Member - Posts: 33

Joined: January 15, 2005

Location: United States

Posted: January 30, 2007 at 4:57 PM / IP Logged

Ive got a 99 chrysler LHS and a ungo rs6000. When i activate the remote start the car will start then die a few seconds later. Sould i change the tach wire or any other ideas...Thanks

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm/remote start, 99 chrysler lhs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.