circle making tool

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / circle making tool (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

messiah9966

Member - Posts: 45

Joined: January 22, 2003

Location: Canada

Posted: February 06, 2003 at 12:36 PM / IP Logged

Does anyone know of a good jig or router attachment for making circles for speaker rings?

r. clark

audiomechanic

Silver - Posts: 388

Joined: November 09, 2002

Location: United States

Posted: February 06, 2003 at 8:19 PM / IP Logged

the perfect circle, jeseda makes a couple and sears sells oneor if you really want you can make one your self..... not that bad to do...the perfect circle is the best I have use dso far...select product sells it for about as cheap as anyone else....installguy509

messiah9966

Member - Posts: 45

Joined: January 22, 2003

Location: Canada

Posted: February 07, 2003 at 11:33 AM / IP Logged

you seem to be the main advice giver on this sight- thanks for all your help, I certainly appreciate it greatly!

Thanks installguy509

r. clark

Powerstroke

Member - Posts: 3

Joined: May 29, 2002

Location: United States

Posted: February 11, 2003 at 11:54 AM / IP Logged

www.jasperaudio.com they sell them cheap at www.partsexpress.com

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: February 11, 2003 at 5:57 PM / IP Logged

Don't know about you guys but at the shop I worked at we made our own out of 1/4 inch plexi that had a rounded bottom with a router attached to the top. It may take some time to make and adjust but is still cheaper then to buy one.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

-=LM=-Raven

Member - Posts: 2

Joined: February 11, 2003

Location: United States

Posted: February 11, 2003 at 11:11 PM / IP Logged

I use a Shopbot CNC router they are about $9,000.00 after complete setup. You can see one at www.shopbottools.com

T.Carlson

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

circle making tool

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.