completly rewiring brakes/turn signals

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / completly rewiring brakes/turn signals (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

importhunter

Copper - Posts: 76

Joined: November 30, 2005

Location: United States

Posted: April 07, 2007 at 6:50 PM / IP Logged

1988 S-10, 1157 bulbs, How do I do it? I have the flashers but I cant get past the idea of the turnsignal working while pressing the brake, please help me !!!!!!!!!!!! LOL

Back to Top

Mad Scientists

Silver - Posts: 380

Joined: February 07, 2004

Location: United States

Posted: April 07, 2007 at 10:11 PM / IP Logged

Typically, the brake wiring runs through the turn signal switch, which determines if the brake light stays on solid or blinks to indicate a turn. If the turn signal switch is in the 'off' position, the brake signal goes to both rear brake lights. If the turn signal switch is indicating a turn, the wire to that rear turn signal/brake light is disconnected from the brake light circuit and hooked the turn signal circuit.

Jim

Back to Top

Search for other posts by Mad Scientists

importhunter

Copper - Posts: 76

Joined: November 30, 2005

Location: United States

Posted: April 08, 2007 at 7:47 PM / IP Logged

I know this might be alot to ask but my friend needs to get his truck inspected, is there a schematic I can use? I know what 2 wires go to the turn signal switch but can you show me how to wire it up?

Back to Top

importhunter

Copper - Posts: 76

Joined: November 30, 2005

Location: United States

Posted: April 10, 2007 at 6:27 AM / IP Logged

Anyone?

Back to Top

Mad Scientists

Silver - Posts: 380

Joined: February 07, 2004

Location: United States

Posted: April 10, 2007 at 6:46 AM / IP Logged

What's happened, what are you rewiring, and what currently works? I'm trying to understand if you're starting the wiring from nothing, is this a rewire, a repair, or a modification.. it's an 88 S10.. are all the parts stock?

Jim

PS.. if it's worth $25 to ya, alldatadiy.com will sell you a one year subscription to all the technical manuals (including wiring diagrams) for that vehicle.. and each additional vehicle is only $15

Back to Top

importhunter

Copper - Posts: 76

Joined: November 30, 2005

Location: United States

Posted: April 10, 2007 at 5:20 PM / IP Logged

We would like to use the stock wiring but there is a short some where but we cannot find it. We found both turnsignal wires comming out of the switch. He really wants to just rewire it all. I would like to keep all the wires stock. I got the turnsignals to work using a jumper wire but when I tried straight positive to the brake side of the buld, the wire got hot.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

completly rewiring brakes/turn signals

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.