compustar wiring diagram

Home / the12volt's Install Bay / Car Security and Convenience / compustar wiring diagram (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

airshives23

Member - Posts: 17

Joined: May 26, 2003

Location: United States

Posted: May 05, 2007 at 4:08 PM / IP Logged

on the compustar 2wss-as

what does the "STATUS" wire do.......its a negative wire........is that the alarm module ground?

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: May 05, 2007 at 7:01 PM / IP Logged

No, the Ground wire is the thick black wire. The status wire is used as the activation trigger for bypass modules. It provides a ground when you hit the button to start the car. It continues to output a ground the entire time the car is remote started. Not all installations require the use of the status wire, but a majority of cars built in the last 10 years will need some type of bypass module. Do NOT connect the status wire to ground, or you may damage the unit.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar wiring diagram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.