negative potential

Home / the12volt's Install Bay / Car Security and Convenience / negative potential (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

peterubers

Silver - Posts: 706

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 29, 2006

Location: United States

Posted: May 25, 2007 at 10:46 AM / IP Logged

negative potential - Page 2 -- posted image.

http://www.radioshack.com/product/index.jsp?productid=2062530&cp=&sr=1&origkw=momentary+switch&kw=momentary+switch&parentPage=search

This swtich is $5.00 and returns to center after you toggle up or down.

The search function is your friend.

Back to Top

jurb

Member - Posts: 39

Joined: May 23, 2007

Location: United States

Posted: May 25, 2007 at 10:46 AM / IP Logged

Sorry that was the only schematic I could find for a switch, I'd be using a momentary switch I should have cut that part out. So for the switch side, I'd connect COM to ground and then pass that onto the relay?

I don't have any directions, I am trying to put it together using this site. I bought a Viper 350HV, and Crimestopper 610 actuators to put in power locks. Hooking the alarm to the actuators isn't a problem because the alarm comes with (-) outputs but adding a switch to generate the same sort of output threw me off.

Back to Top

peterubers

Silver - Posts: 706

Joined: December 29, 2006

Location: United States

Posted: May 25, 2007 at 10:52 AM / IP Logged

No problem.

Yes, definitely use chassis ground for COM, this will send a negative or grounding signal to either the blue or green wires coming off the DPDT momentary switch depending on whether your unlocking or locking.

The search function is your friend.

Back to Top

jurb

Member - Posts: 39

Joined: May 23, 2007

Location: United States

Posted: May 25, 2007 at 11:24 AM / IP Logged

I really appreciate the help, if you are ever cursed enough to be in Saint Louis I owe you a drink.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: May 28, 2007 at 5:18 AM / IP Logged

Re your relay diagramme, if you want neg outputs at 30, disconnect 87a (dont use) and make 87 NEG input ie wire to ground.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

negative potential

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.