99 dodge durango, door trigger

Just got done installing a AutoCommand 2-Way Remote Start,Alarm. Everything works great except i get a extra chirp when arming. As it is seeing a door open. I got the dorr trigger wires in the kick panel, and the domelight supervison hooked up to the courtsey light under the drivers dash. The dome light stays on after i arm, Any reason why? Im thinking this is why im getting the extra chirp. Any ideas? Thanks in advance.

i have the door trigger hooked to the BLACK/ blue. I stll have to diode isolate and hook up the other three doors. Should it be ok to use the courtesy light to trigger the domelight supervision? If not where is the best place for it? Thanks.

Use those 2 wire and diode isolate.  After connecting the 2 it will control all doors.  If im not mistaken it is the green wire from the autocommand that is the negative door trigger.  Disconnect the BLACK/ white wire and see if after locking they shut off.