alarm stopped working need manual

Home / the12volt's Install Bay / Car Security and Convenience / alarm stopped working need manual (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stinkyfatpig

Member - Posts: 12

Joined: May 11, 2007

Location: Canada

Posted: July 20, 2007 at 2:22 PM / IP Logged

this alarm was install when i bought this truck, the guy took his stereo out and ever since then it hasnt worked. i have followed wires as best as i can but i cant figure it out... the motion sensor is working cause the light, lights up when i tap it.. and its getting power cause i tested a bunch of the wires but i dont know which should be get power as i dont have the diagram..

its an ungo ms2004 03070004s i tried there website and thought i got what i thought was the manual but it doesnt look like the right one once i started to test wires

Back to Top

bbtaco

Copper - Posts: 119

Joined: November 03, 2002

Location: Virginia, United States

Posted: July 20, 2007 at 10:59 PM / IP Logged

Ungo

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm stopped working need manual

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.