the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

99 lexus gs300 remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
carguy411 
Silver - Posts: 683
Silver spacespace
Joined: April 02, 2002
Location: United States
Posted: July 23, 2007 at 9:45 AM / IP Logged  
ok ijust did a remote start alarm(dei-563t) on a 99 lexus es300. everything is fine till i remote start it. it tries to crank over and doesnt then sometimes it will the thing is when it doesturn over the engine sounds wired and a whole bunch of lites pop up on the dash. oild engince and some others.if i stop it restart with the key its fine. i firsted used a dei-1100xbypass then used a 556uw. if i put the key in the ginition and remote sart it it cranks over but still het all the lights till i hit the bake and shut down the remote start. sometimes it will stay on or after a min or so shut off entirely. i have to give him the car back soon can someone help me out to see what it is. ialso had prob finding the tach. and i seen alot of people were having trouble looking for that denso box on the 6 cyl. i ran the take to an injector so that should be good. sorry for the long post. pleast le me know anf ifo. thank you
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: July 23, 2007 at 9:59 AM / IP Logged  
Ensure that IGN #2 ( BLACK/ WHITE ) is hooked up and also sending 12 volts to this wire from the RS unit. Also check to make sure that the main IGN is also powering up properly from the RS.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
carguy411 
Silver - Posts: 683
Silver spacespace
Joined: April 02, 2002
Location: United States
Posted: July 23, 2007 at 11:55 AM / IP Logged  
i checked all the ign,acc , and power wires everything was hooked up write. anything else u trhnk it is
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: July 23, 2007 at 3:14 PM / IP Logged  
Check your resistance to ground. This could be a problem.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
carguy411 
Silver - Posts: 683
Silver spacespace
Joined: April 02, 2002
Location: United States
Posted: July 23, 2007 at 4:03 PM / IP Logged  
it seems to be ok. its like its freaking out when in remotestart. can i be using the wrong bypass? or am i forgetting something. i know i have to tape int othe keysense wire it was the only wire there wit that color i think it was blue/black in a 2pin harnes or maybe the way i got my tach is that good off an injector? plase let me know. thanks
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: July 23, 2007 at 4:12 PM / IP Logged  
Remove the bypass that you have now and try to start with the key in the ignition to see if the problem is still there. If it's still there, then it's not the bypass. Now go to the ECM for the tach signal instead of the injector and see if the problem persists.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
carguy411 
Silver - Posts: 683
Silver spacespace
Joined: April 02, 2002
Location: United States
Posted: July 23, 2007 at 6:19 PM / IP Logged  
so put the key in the ign. and turn it on the remote start it or just put the key in. also where is the tach at the ecm and where is the ecm in this car. all i have is that "denso" box under the hood near the strut i cant find. thanks
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: July 23, 2007 at 6:41 PM / IP Logged  
ECU box which is under hood on the drivers side Look for a 28 pin plug, pin #16. When you remove the bypass module, take the key and just leave it in the ignition in the OFF position. Now try to remote start the vehicle. This will eliminate the bypass module for possible problem if the problem persists & if it goes away, then you found the problem.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
carguy411 
Silver - Posts: 683
Silver spacespace
Joined: April 02, 2002
Location: United States
Posted: July 23, 2007 at 10:58 PM / IP Logged  
ok thanks im going to try it
he took the car cause he needed it for work so im going to get it this weekend
i think i tried doin that with the key and it still tripped all the dash lights so im thinking maybe its the tach?u have a color for that wire on the ecu?
could that be it
thanks for your help
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: July 23, 2007 at 11:07 PM / IP Logged  
The wire is BLACK / YELLOW.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer