sub problem

Subsonic filter set at 25 Hz

Low pass filter is on 80 Hz, Subsonic filter is on 25 Hz, Parametric Eq is on 50 Hz, Width is 1, Level is 10 db,

Low pass filter is on 80 Hz, Subsonic filter is on 25 Hz, Parametric Eq is on 50 Hz, Width is 1, Level is 10 db, this settings were before now Low pass filter is on 50 Hz, Subsonic filter is on 25 Hz, Parametric Eq is on 50 Hz, Width is 1, Level is 10 db,

Set everything as high as it will go except for the subsonic filter leave it at 25 HZ. I am going to get the manual for your amp so I can better understand you amps features. Also what time is it over there?

I correct my self turn off everything (subsonic, bass correction, parametric etc) only leave on the LPF (Low pass filter) and set it to 200 and listen to it. Then set the LPF to 100 and let me know what happens>

try turning the parametric EQ off, turning the Low Pass Filter up to 85 or 90Hz and turning the Subsonic filter completely off... put one of the bassiest songs that you listen to into your deck, and turn the volume to 3/4...go back to your amp while the song is playing and play with the gains, starting at 0 and working your way up until you hear a little distortion...once you hear distortion, turn the amp gain down a bit and see what happens...that should be close to optimum settings for your amp... after you have this set, you could start to play with the subsonic filter and the parametric EQ, but without a good understanding of how the parametric EQ works, its a pain in the ass to play around with...you may also want to play with the low pass filter setting a bit too, if that is too high for the music that you listen to...but your ear will tell you far more than I can sitting at my computer as far as what will sound good and what wont...

sory bberman1 can we continue tmorrow because it's 23:08 outside? Thank you

Not a problem

Hi again.I tried to turn all filters off exept Low pass filter and then i am getting different soun which i do not like.So i thinki had CD with too much bass that's why i was getting too much distortion but now i think alpine's sub can't kick hard enough!May be i shoud put some stuffings inside???????? May be ported box??????? I do not know but i am still going to find any shop (Alpine one)and listen the same sub may be nothing wrong with it? What are you thinking guys about changing boxes?And any ideas on this sub how it can kick? Thank you

Where can i learn something so as i could understand EQ and all frequencies? Thank you