the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

compustar remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
thundercat2k 
Member - Posts: 5
Member spacespace
Joined: June 16, 2004
Location: United States
Posted: September 08, 2007 at 9:48 PM / IP Logged  
trying to install a compustar 3000 remote start/alarm ANywho just have question on wires listed as starter output, accesory output, ignition output, where exactly do these get connected.
init 
Copper - Posts: 93
Copper spacespace
Joined: March 13, 2007
Location: Louisiana, United States
Posted: September 08, 2007 at 10:39 PM / IP Logged  

You need to have a wiring diagram of your car to know where the wires are and what color they are.  Once you know, you test them with a digital multimeter and make sure they're the right ones.  After you've done that, you then connect the wires from the system to the wires you've found & tested in the car, adding any relays if needed (read the install manual of the system to see what needs to happen).

If you post what car you have I'm sure one of us will post a wire chart for your vehicle.

Steven Kephart 
Platinum - Posts: 1,737
Platinum spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: November 06, 2003
Location: Oregon, United States
Posted: September 09, 2007 at 1:44 AM / IP Logged  
Are you talking about the small awg negative wires?  If so then they are supposed to be connected to the supplied relay.  They provide a second igntion, accessory, or starter output for those vehicles that require one.  For example, if the vehicle has a second accessory, then hook accessory negative output wire up to the purple wire on the relay and the blue wire will be triggered as a second accessory.
thundercat2k 
Member - Posts: 5
Member spacespace
Joined: June 16, 2004
Location: United States
Posted: September 09, 2007 at 7:51 AM / IP Logged  
yeah that was what i was talking about, the small wires. In my case I was wanting to have ing and acc on when car starts my car does not have second accessory

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer