the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

bypassing auto factory roll down switch


Post ReplyPost New Topic
< Prev Topic Next Topic >
ceasar326 
Copper - Posts: 239
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 02, 2006
Location: Minnesota, United States
Posted: September 11, 2007 at 4:47 PM / IP Logged  

Ive recently installed a crimestopper CS-2014FM remote start and pager to a customer 98 lincoln navigator. Know im istalling window roll down modules, Autopage AC-78. For all four windows. I got both window modules hooked up. Everything works good but, when i activade aux 3 from alarm all windows go down except the driver door. I think that the auto factory window switch is not letting the driver roll down. Is there a way to bypass it or how would i wire it to make the driver door rool down? The module is a rool down when activade and rool up when arm. Wen arm all windows rool up. The only problem is rooling down the driver door any ideas?

Also he has one 6oo jensen hooked up as bass for a 10" kicker. Hes battery drains quick after playing 3 songs when the truck sits turned off. What would couse the battery to drain so quick? Is there a way to fix that problem? Any help would be much appreciated!

howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: September 11, 2007 at 5:06 PM / IP Logged  
Go directly to driver  widow lift motor?
init 
Copper - Posts: 93
Copper spacespace
Joined: March 13, 2007
Location: Louisiana, United States
Posted: September 11, 2007 at 6:03 PM / IP Logged  
You'll need to take the door panel off to gain access to the wire.  You then need to connect in between the rolldown module and the factory motor.
ceasar326 
Copper - Posts: 239
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 02, 2006
Location: Minnesota, United States
Posted: September 11, 2007 at 6:20 PM / IP Logged  

All my wires i got from the main switch driver door panel! So i should get the wires from the driver side and not from the master switch?

howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: September 11, 2007 at 6:33 PM / IP Logged  
ignore the switch go directly to motor
ceasar326 
Copper - Posts: 239
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 02, 2006
Location: Minnesota, United States
Posted: September 11, 2007 at 7:17 PM / IP Logged  

ok thanks ill try going to the motor, ill let you guys know how it when.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer