the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2001 ford taurus bypass problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
Autosexual 
Member - Posts: 47
Member spacespace
Joined: January 31, 2004
Location: United States
Posted: October 20, 2007 at 6:09 PM / IP Logged  

I hope someone can help, I have to fix this fast.

I installed a DEI RS and I used a DEI 1100f bypass.  I hooked up all the wires for the bypass, Programed it and the RS worked fine, then I unplugged it so I could solder the connections.  Then I plugged the bypass back up and reset it , but when I was reprogramming put in the first key got the green light put in the 2nd key and pressing the program button on the bypass and then when I would go to RS it would crank but it would not turn over.

Does any one know how to solve this problem ?

Autosexual 
Member - Posts: 47
Member spacespace
Joined: January 31, 2004
Location: United States
Posted: October 20, 2007 at 8:00 PM / IP Logged  
does anyone know if it is true that you can only program 10 keys off of the ford Taurus key cylinder?
Autosexual 
Member - Posts: 47
Member spacespace
Joined: January 31, 2004
Location: United States
Posted: December 12, 2007 at 4:25 PM / IP Logged  

OK i found out the answer to my questions.

Yes it is true you can only program a 6 to 8 keys for the Fords and after that you have to clear them out and then you start fresh and can program another 6 to 8 keys.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer