motorcycle remote start, delay/longer sig

Home / the12volt's Install Bay / Motorcycle Electronics / motorcycle remote start, delay/longer sig (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

impulsebsd

Member - Posts: 2

Joined: October 24, 2007

Location: Arizona, United States

Posted: October 24, 2007 at 2:04 PM / IP Logged

Hello out there, I just joined the forum, I'm seeking advice on a remote start/alarm setup on my motorcycle.

I need to take a instant signal of +12v that lasts .7 seconds, and delay it for 2 seconds, and then output for 1.5 seconds. (.7 secs is not long enough to start the bike when cold, and the delay is to allow the fuel injection to calibrate on startup).

My friend has come up with a possible solution to delay it, using the LM555 ( http://www.national.com/mpf/LM/LM555.html) utilizing a POT that ranges from 1Mohm to 10Mohm, and a CAP that is 10uF. That SHOULD take care of the delay, but I have no clue where to start converting a .7secs signal to 1.5secs..

Anyone have a possible easier solution to incorporate the 2?

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: October 24, 2007 at 2:58 PM / IP Logged

What is the make and model of your remote start? I have done a couple on bikes but the DEI pieces I used had a tachometer input (to control how long the starter is run) and a programmable diesel delay (to energize ignition for a preset time prior to energizing the starter).

Installer, IT support, and FFL. I need less hobbies.

impulsebsd

Member - Posts: 2

Joined: October 24, 2007

Location: Arizona, United States

Posted: October 24, 2007 at 3:01 PM / IP Logged

Twelvoltz wrote:

it is a LM508 http://www.wcc-tech.com/spyLM508.htm

as far as i know it doesnt have that option..

if it helps its a 2007 600RR

scottie31

Member - Posts: 3

Joined: January 16, 2008

Location: New Brunswick, Canada

Posted: January 16, 2008 at 5:43 PM / IP Logged

Were you able to get your remote start working? If so, where did you connect the brown & blue wires?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

motorcycle remote start, delay/longer sig

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.