prostart 3200

Home / the12volt's Install Bay / Car Security and Convenience / prostart 3200 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

opj38

Member - Posts: 31

Joined: November 02, 2002

Location: Canada

Posted: November 01, 2007 at 10:06 PM / IP Logged

Hi, Installed a remote starter in a 95 civic. All wires are installed correctly. The only problem that I have is trying to program the remote. I flash the hood pin to get into programming mode, and then turn the key on and off and then push the 1 button on the remote and wait for the 5 flashes from the parking lites, and nothing. Did this 100s of times and nothing. Any help please. Oh this is a Canadian Tire Prostart 3200 with the 2 button remote.

Back to Top

lspker

Silver - Posts: 503

Joined: November 23, 2003

Location: Canada

Posted: November 01, 2007 at 11:17 PM / IP Logged

press and hold lock till flashes, or sometimes press twice.

Check annt is plugged into proper slot.

Back to Top

dea,can

Copper - Posts: 284

Joined: January 12, 2006

Location: Saskatchewan, Canada

Posted: November 03, 2007 at 4:30 PM / IP Logged

when u are programming are your park lights coming on.hold for 4 secs let go park should come on push it again then quick once more so 3 times

dragon

Back to Top

stangbanger242

Member - Posts: 19

Joined: June 08, 2005

Posted: November 28, 2007 at 4:07 PM / IP Logged

might be a faulty antenna. heard on these post some people having same problems

Support the TROOPS!!

Back to Top

Search for other posts by stangbanger242

schmoo

Copper - Posts: 62

Joined: April 21, 2005

Location: Canada

Posted: November 28, 2007 at 5:45 PM / IP Logged

turn the key off/on/off then press the lock butoon repeatedly, that should get it to recognize the remote. Done lots and that is a common hold-up on the unit.

a true canadian eh!

Back to Top

muaiad97

Copper - Posts: 207

Joined: April 08, 2003

Location: Canada

Posted: November 29, 2007 at 8:33 PM / IP Logged

hi

just do this ground the hood pin and push the programing button on the sid of the brain push it and release it and push it release it again turn the key on off then hold the lock button til you get 5 flashing light and u will be ok

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

prostart 3200

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.