viper 3002 dome light wiring

Home / the12volt's Install Bay / Car Security and Convenience / viper 3002 dome light wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mito57

Member - Posts: 46

Joined: April 21, 2004

Location: United States

Posted: November 07, 2007 at 8:42 PM / IP Logged

I'm installing a Viper 3002 in a 2003 Dodge Ram 1500 Pickup 4.7L

I have all working except the dome lightr. The manual says that the polarity of the dome light supervision output is determined by the connection of the wire H2A on the relay harness. It also says that if you do not connect this wire will be no output. The unit does not have a relay harness so it's probably a mistake on the manual. There is a H2 auxiliary connector but it does not have a H2A wire. Any help on this?

Back to Top

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: November 07, 2007 at 8:57 PM / IP Logged

What you feed into the BLACK/ white (H3/A) dome light input on the H3 harness is what will be fed out to the BLACK/ white dome light output (H1/4) on the H1 harness.

So for your 03 Dodge, ground the BLACK/ white in the H3 harness and hook the BLACK/ white H1 wire to the brown wire running up the A pillar that shows ground when the dome light is on.

Installer, IT support, and FFL. I need less hobbies.

Back to Top

mito57

Member - Posts: 46

Joined: April 21, 2004

Location: United States

Posted: November 08, 2007 at 9:38 AM / IP Logged

Thanks for your help. Now that you said it I found it in the manual. It's the door lock/unlock harness.

So, if I ground this relay input and connect the output to any door switch that should make the dome light work. Am I right ?

Back to Top

Twelvoltz

Platinum - Posts: 2,384

Joined: March 24, 2005

Location: New Jersey, United States

Posted: November 08, 2007 at 9:51 AM / IP Logged

mito57 wrote:

So, if I ground this relay input and connect the output to any door switch that should make the dome light work. Am I right ?

Yes it will turn on the dome light when you unlock/disarm.

Installer, IT support, and FFL. I need less hobbies.

Back to Top

mito57

Member - Posts: 46

Joined: April 21, 2004

Location: United States

Posted: November 08, 2007 at 12:51 PM / IP Logged

Thank you for your help. viper 3002 dome light wiring - Last Post -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 3002 dome light wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.