the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

timer switch


Post ReplyPost New Topic
< Prev Topic Next Topic >
double-j 
Member - Posts: 9
Member spacespace
Joined: January 01, 2008
Posted: July 22, 2009 at 4:55 PM / IP Logged  
I have some novelty horns on my vehicle and have a question about adding switch to activate them. I would like to use a push button (momententary) that is on a timer of some sort. The hons run for about 4 seconds I would like them to turn off when the melody is complete... So Do they make something that would allow me to do this. Something that is adjustable so when I hit the button It will play for exactly 4 seconds?
Thanks again for all the help!
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: July 23, 2009 at 2:33 PM / IP Logged  
Directed 528t, or look at the relay section.
double-j 
Member - Posts: 9
Member spacespace
Joined: January 01, 2008
Posted: July 23, 2009 at 4:24 PM / IP Logged  
Thanks for the info... I'm having a hard time wrapping my head around how this is going to be wire. I've made a basic diagram of how I want to run the horn compressor to the relay up to the "normally closed" momentary switch. I'm at a loss on how to connect the 528t to all of this. I've also attached the directions that come with the unit. Thanks for the input!
timer switch -- posted image.
timer switch -- posted image.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: July 24, 2009 at 11:37 AM / IP Logged  
Throw away the first relay, and the NC momentary switch, swap it for a normally open, i.e. the normal type that makes the circuit when you push it. One side to ground, other side to black stripe on 528t, ground the black on the 528t, 20amp fuse to red and yellow on 528t, brown on 528t to air horn compressor, don't use the orange, don't cut the loop, set the pot on the 528t for about 4secs. that's it. When you've done that I'll teach you how to turn a 528t into a variable wiper control.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer