the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Tach Install Problem 04 Accent


Post ReplyPost New Topic
< Prev Topic Next Topic >
04Hyundai 
Member - Posts: 1
Member spacespace
Joined: March 07, 2005
Location: United States
Posted: March 07, 2005 at 7:20 PM / IP Logged  
I have hooked up a Summit tach in my 04 Accent. I tapped the grey wire pin #8 off of the ECU for my signal. The tach does work but it doesnt read the same as my stock tach any ideas why?
Thetruth 
Member - Posts: 5
Member spacespace
Joined: March 07, 2005
Location: United States
Posted: March 07, 2005 at 8:42 PM / IP Logged  
I had a similar problem with my 2003 accent i had a Sunpro guage and had the same problem mine had a difference of arounb 300 rpms between the two. I taped into the gray wire behind the guage cluster but its the same thing. I think i had the problem because i had a cheap guage.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer