the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Thickness majority?


Post ReplyPost New Topic
< Prev Topic Next Topic >
toolinmaine 
Member - Posts: 26
Member spacespace
Joined: November 07, 2005
Location: United States
Posted: January 28, 2006 at 10:38 PM / IP Logged  
Hello, I am 16 yrs old and i have worked with fiberglass on vehicles and boats but never for a subwoofer enclosure. I have read almost every thread on this site over the past two months and nothing has seemed to answer some of my quiestions as a beginer. I have a volkswagon and i am preparing to build a box to house 2 12 inch subwoofers and a panel for a 1200 watt amp. I wanted to know what you have for a box and accesories and how many layers of fiberglass you applied to your model. This is basically so i can get an idea of how many layers for my box and how yours were constructed. Thank you for your time.
eric anderson-nosredna cire
bellsracer 
Silver - Posts: 703
Silver spacespace
Joined: January 14, 2006
Location: United States
Posted: January 30, 2006 at 2:29 AM / IP Logged  

Pretty vague information toolin. There is all kinds of ways to build a box, so it is more important to think about what kind of sound you want, where you want the speakers, and what materials you are comfortable with.

If you are looking for a tighter, more responsive bass build a sealed box. Ported for deeper, boomier bass. You can also put polyester stuffing into a sealed box to get a boomier voice out of hte subs.

If you plan on using F/G for your materials, build it up at least 3/8" thick to cope with vibration. One of the best ways for the box to minimize the vibration is to build a good frame to hold the speaker rings before you fiberglass.

One of our guys early projects used MDF boxes for the speakers and just used to the fiberglass to fill in the areas between the boxes and amp panels.

In short, without more information, it is kind of hard to tell you what to do.

Ganbatte ne (Good luck)

Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.
corty 
Member - Posts: 2
Member spacespace
Joined: January 24, 2006
Posted: January 31, 2006 at 11:05 AM / IP Logged  

are three thick layers of FG enough?

as a filler i used stucco mixed with white wood glue. havent tried it yet... any opinions??

bellsracer 
Silver - Posts: 703
Silver spacespace
Joined: January 14, 2006
Location: United States
Posted: February 02, 2006 at 5:45 AM / IP Logged  
corty wrote:

are three thick layers of FG enough?

as a filler i used stucco mixed with white wood glue. havent tried it yet... any opinions??

It isn't so much about number of layers so much as the thickness of the fiberglass in total. We find that multiple thinner layers tend to be much stronger than a few thick layers.

As for your filler mix, no clue!

Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.
HottAccord 
Silver - Posts: 247
Silver spacespace
Joined: August 12, 2004
Location: United States
Posted: February 02, 2006 at 7:40 PM / IP Logged  
Well basically, you'd have to do the thumb test. Push your enclosure with your thumb and if it flexes, its not thick enough. This means it will flex once the sub starts pounding inside the box. If you're using 1 1/2 oz fiberglass mat, you'd probably want to do at least a minimum of 5 layers. Most people prefer 5-8 on average, it depends on how much power you're gonna feed to the sub.
As far as your stucco/white glue, that might be good for boats. But for glass boxes, you're gonna have to get some polyester resin for your mat to soak/harden in. Check out number of Glass Layers Xplained. Good luck!
Im a fiberglass whore!!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer