how to hide wires

Ok, so i am on the bondo stage and i tested fitted everything and i relized that i didn't do anyhting to try and hid my wires on my amp so they are just kinda out there. Is there anyway i could hide the wires or make them look better there? Well if anyone got any type of suggestion or idea hit me with them i cna use jsuta bout anything thanks.

pic: [IMG]https://img.photobucket.com/albums/v200/BurningMaverick/P1010017.jpg[/IMG]

Get some spacer tubes to raise the amp off of it's mounting surface using some longer screws then get some 1" or whatever size PVC pipe that all of your wires can run through and directly in the center of the area underneath where the amp is at make a hole in the box to match the size of the PVC tube and then on the opposite wall make another hole and then slide the PVC tube through the center of the enclosure. Seal up the ends of the tube to the enclosure and then cut and sand down the tube flush to it's surface. Now run your wires through them. Where they come out under the amp route them to the amps terminals and have them fold under.

Jim

Something like this. Choice of materials and color are up to you. Consider 1/4" MDF with paint, or brushed metal.