Flux capacitor

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Flux capacitor (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Reeceddogg

Copper - Posts: 329

Joined: September 23, 2002

Location: United States

Posted: January 24, 2006 at 10:13 PM / IP Logged

I want to make a flux capacitor like in back to the future but i can't come up with a way of doing it. i was thinking using a neon rope light but i can't find one that flashes

tnrplaya

Copper - Posts: 58

Joined: August 22, 2003

Location: United States

Posted: January 24, 2006 at 10:14 PM / IP Logged

Christmas lights?

PG Limited Edition Octane Aplifier

PG Ti400.2

(2) JL12w6v2

Focal 165KF

JL TR-690TXi

Sony XAV-7W

Sony 10 Disc MP3 Changer

X-box

APC 350W inverter

Monster 1/0

Irragi 180A Alternator

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: January 24, 2006 at 10:18 PM / IP Logged

LEDs and dei led sequencer.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

firstrax

Copper - Posts: 113

Joined: January 18, 2006

Posted: January 25, 2006 at 5:56 PM / IP Logged

How about a high power LED and some 3M HL fiber optic cable?

Flux capacitor -- posted image.

Reeceddogg

Copper - Posts: 329

Joined: September 23, 2002

Location: United States

Posted: January 25, 2006 at 7:19 PM / IP Logged

how do i do that and what do i need to get

firstrax

Copper - Posts: 113

Joined: January 18, 2006

Posted: January 25, 2006 at 8:09 PM / IP Logged

Your going to need some side emitting fiber optic. http://www.fiberopticproducts.com/danise/cart.pl?db=stuff.dat&category=Sideglow

And some leds. I'm using single K2 led in the picture, 3.7 volts @ 1000mA. If your fiber is small (3-5mm) and short (less than 18") enough you can use regular LEDs, one at each end. Just butt the LED up against the end of the fiber and slide some heat shrink tubing over the led and part of the fiber to hold them together. Use different color leds and switch between them to change the fiber color. Or run both and the fiber will fade from one color to the other along its lenght.

ingolf

Member - Posts: 21

Joined: January 17, 2006

Location: United States

Posted: January 30, 2006 at 11:59 AM / IP Logged

if your doing this in anything but a delorean, its gonna look tacky

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Flux capacitor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.