the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

how to wire 3 speakers into a crossover


Post ReplyPost New Topic
< Prev Topic Next Topic >
steezs 
Copper - Posts: 172
Copper spacespace
Joined: October 30, 2005
Location: Canada
Posted: April 10, 2008 at 5:43 PM / IP Logged  
I have 2 mid bass speakers and one tweeter. Can someone show me by diagram of how to wire these 3 together with with a cross over? Id ike to make a 2nd order narrow band pass for the mids of high pass 80 hertz  and low pass of 800 hertz and the tweeters 2nd order high pass at 5000hertz. I want the net impedence above 6ohms and all 3 of the speakers are 4 ohms.
the duce
sedate 
Silver - Posts: 1,173
Silver spacespace
Joined: July 03, 2004
Location: Colorado, United States
Posted: April 10, 2008 at 6:55 PM / IP Logged  

steezs wrote:
I want the net impedence above 6ohms and all 3 of the speakers are 4 ohms.

Your making a stereo monitor with left over car stereo parts? 

steezs wrote:
Id ike to make a 2nd order narrow band pass for the mids of high pass 80 hertz  and low pass of 800 hertz and the tweeters 2nd order high pass at 5000hertz

I don't understand the xover points you want.  Retype that sentence, pay attention to grammer and comma placement, and then when like 30 different meanings can't be extrapolated maybe someone will help you.

"I'm finished!" - Daniel Plainview
steezs 
Copper - Posts: 172
Copper spacespace
Joined: October 30, 2005
Location: Canada
Posted: April 10, 2008 at 7:22 PM / IP Logged  
I mean after you connect  them all together the speaker impedance cannot be less than 6 ohms or my amp will get loved up.
the duce
sedate 
Silver - Posts: 1,173
Silver spacespace
Joined: July 03, 2004
Location: Colorado, United States
Posted: April 10, 2008 at 7:28 PM / IP Logged  

Right - I know that because your final sentence adheres to the rules of the English language. 

This sentence, on the other hand, is a real mess:

steezs wrote:
Id ike to make a 2nd order narrow band pass for the mids of high pass 80 hertz  and low pass of 800 hertz and the tweeters 2nd order high pass at 5000hertz.
Try again.

"I'm finished!" - Daniel Plainview
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: April 10, 2008 at 8:08 PM / IP Logged  
What about the frequencies between 800 and 5000?  I think you will have a hole. 
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: April 10, 2008 at 8:09 PM / IP Logged  
https://www.the12volt.com/caraudio/cross.asp    You need to read the entire page, there are formulas to give you the capacitor and inductor values.                                                                                                 comma  ^
steezs 
Copper - Posts: 172
Copper spacespace
Joined: October 30, 2005
Location: Canada
Posted: April 10, 2008 at 8:28 PM / IP Logged  
ya well the speakers kinda suck just wanna see how they sound, ok then cross the mid speakers from 80-5000 hertz and the tweeters for the higher frequencies.
the duce
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: April 10, 2008 at 8:37 PM / IP Logged  

That would sound a whole lot better than the 80 to 800   and  5K and up

steezs 
Copper - Posts: 172
Copper spacespace
Joined: October 30, 2005
Location: Canada
Posted: April 10, 2008 at 9:01 PM / IP Logged  
Ok, so how would i do it with all 3 speakers going to one channel with proper crossovers to each, can you make me a diagram?
the duce
sedate 
Silver - Posts: 1,173
Silver spacespace
Joined: July 03, 2004
Location: Colorado, United States
Posted: April 10, 2008 at 9:14 PM / IP Logged  

idiot wrote:
What about the frequencies between 800 and 5000?  I think you will have a hole. 

Right - see that's what I took away from his sentence - but I thought to myself 'no way - this guy just doesn't know how to type'

-ahh- I really should just give up. how to wire 3 speakers into a crossover -- posted image.

"I'm finished!" - Daniel Plainview
Page of 3

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer