the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

missing fuses


Post ReplyPost New Topic
< Prev Topic Next Topic >
jettagli03 
Copper - Posts: 311
Copper spacespace
Joined: January 16, 2005
Location: United States
Posted: May 12, 2008 at 9:28 PM / IP Logged  
My friend has a JBL 1201.1 mono amp and it has three 40 amp fuses on the amplifier. One was missing when he set the gains and he has now found it.
What exactly does a missing fuse do to an amplifier? Is there a loss of protection or a loss of output? or possibly both?
He was wondering if he needs to change his gains or if it is the same after putting the third fuse back in.
stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: May 12, 2008 at 9:41 PM / IP Logged  

Since it's evident by your post that he tested the amp with tones or music to set the gain, the amplifier is working without the third fuse.  All three fuses, then, do not have to be installed for the amp to operate.  The fuses combine to provide protection against an over-current condition.  A missing fuse means that the current that the amplifier can withstand is lower than it could safely be.

He will not have to re-adjust the gains.  The fuse rating doesn't affect signal input.  (But between you and me, I would give it another go anyway!  Maybe just a little superstitious about things.  ;)

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
jettagli03 
Copper - Posts: 311
Copper spacespace
Joined: January 16, 2005
Location: United States
Posted: May 12, 2008 at 9:45 PM / IP Logged  
Thanks for the info and so fast.. I'll tell him not to worry and I'll probably set them for him with an O-scope when I get the chance

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer