the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

cadillac escalade 2004


Post ReplyPost New Topic
< Prev Topic Next Topic >
oteroi1 
Member - Posts: 2
Member spacespace
Joined: July 19, 2009
Location: Texas, United States
Posted: January 09, 2010 at 10:34 PM / IP Logged  
How do you instal a hi and low adapter to a factory navigstgion radio on a 2004 cadillac escalade. I tried getting it from one speaker but the radios volume keeps going up and down
yimke 
Copper - Posts: 417
Copper spacespace
Joined: June 23, 2009
Location: Nebraska, United States
Posted: January 09, 2010 at 10:41 PM / IP Logged  
Where did you grab the wires for it? If at the deck, then you HAVE to go after the amp.
oteroi1 
Member - Posts: 2
Member spacespace
Joined: July 19, 2009
Location: Texas, United States
Posted: January 14, 2010 at 11:17 PM / IP Logged  
i grad the wire that goes directly to the left speaker in drivers side. the color is BROWN / yellow
Cgarnes 
Member - Posts: 1
Member spacespace
Joined: July 08, 2005
Posted: January 17, 2010 at 10:28 PM / IP Logged  
I grab them under the cupholders in the center console. If I remember right the colors are red and black. They are by themselves on a clip leading to the factory sub.
yimke 
Copper - Posts: 417
Copper spacespace
Joined: June 23, 2009
Location: Nebraska, United States
Posted: January 18, 2010 at 9:20 AM / IP Logged  
You probably grabbed the wrong wire. Did you test for resistance between the two wires? It should be around 8 ohms for the Bose setup. Also WHERE did you grab it from? In the door boot or at the speaker? Like I said if you are doing this behind the navigation unit, this will not work.
Go to the amp under the center console and grab your BROWN / yellow there, or tan/gray.
zerepdivad 
Silver - Posts: 605
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: July 03, 2006
Location: Wisconsin, United States
Posted: January 18, 2010 at 9:33 PM / IP Logged  
Get he wires in the kick panel harness to the rear. Either side.
A DMM is a beautiful thing.
MECP Advanced Installer Certified.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer