minimum width for sub enclosure?

Home / the12volt's Install Bay / Car Audio / minimum width for sub enclosure? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

fronzizzle

Copper - Posts: 57

Joined: February 21, 2010

Location: Michigan, United States

Posted: March 08, 2010 at 12:27 PM / IP Logged

Okay, I know that every sub has a minimum air space requirement, but is there a "best practice" for just the minimum width? If I have a 10" sub, should I not go less than 11" or 12" width? I have plenty of vertical space in my trunk as well as space front-to-back but the width is a little tight. Thoughts?

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: March 08, 2010 at 1:09 PM / IP Logged

It really doesn't matter for subwoofers. Make it fit. minimum width for sub enclosure? -- posted image.

Support the12volt.com

fronzizzle

Copper - Posts: 57

Joined: February 21, 2010

Location: Michigan, United States

Posted: March 08, 2010 at 2:23 PM / IP Logged

Exactly what I wanted to hear. Thanks!

i am an idiot

Platinum - Posts: 13,693

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: March 10, 2010 at 7:25 PM / IP Logged

Smaller mounting area and a deeper box will almost always give you better results than a larger area and shallow box.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

minimum width for sub enclosure?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.