putting in a radio from scratch

Home / the12volt's Install Bay / Car Audio / putting in a radio from scratch (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

carmadgaz

Member - Posts: 1

Joined: March 23, 2011

Location: United Kingdom

Posted: March 23, 2011 at 2:36 PM / IP Logged

I have a pair of vehicles I am installing radios into (1967 Landrover and a 1968 Volvo Amazon). Both have brown power wires for a radio but no other wiring (speakers, aerial etc).

Installing speakers etc is easy enough but has anyone got diagrams / info on how to wire it all to iso blocks?

Thanks.

oldspark

Gold - Posts: 4,913

Joined: November 03, 2008

Location: Australia

Posted: March 23, 2011 at 7:12 PM / IP Logged

Eh?

Do you mean you want the iso wiring - like Wikipedia ISO 10487?

From that it's your own wiring.

And normally I'd suggest it's own power wire, but I do that for independence of any sub-standard OEM car wiring and IgnKey.

I'd use a relay if Acc or Ign off was to off the radio, but I prefer manual on &off - hence my +12V permanent and switched are the same if independent fusing isn't an issue.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

putting in a radio from scratch

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.