the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

8 speaker location


Post ReplyPost New Topic
< Prev Topic Next Topic >
smitcs3 
Member - Posts: 2
Member spacespace
Joined: November 12, 2011
Location: Australia
Posted: November 12, 2011 at 6:38 AM / IP Logged  
Hey guys first time poster long time reader, really helped me out on a quite a few things and would like to say thanks :) anyway had a search couldn't find my exact answer
Basically im putting my new sound system in my car, it has a factory 7 speaker setup atm:
Centre
Front Left
Front Right
Rear Left
Rear Right
Parcel Shelf Left
Parcel Shelf Right
Basically i want to do this
Centre (disconnect)
Front Left (6.5 Split)(tweeter separate on dash)
Front Right (6.5 Split) (tweeter separate on dash)
Rear Left (6.5 Coax)
Rear Right (6.5 Coax)
Parcel Shelf Left (8" midbass driver)
Parcel Shelf Right (8" midbass driver)
Boot (2 x 15" Subs)
will this be ok? or should i put the midbass drivers somewhere else? do i need a box for them or some sort of enclosure, everything will Memphis M-Class. Any other input would be awesome!
forbidden 
Platinum - Posts: 5,353
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: November 01, 2003
Location: Alberta, Canada
Posted: November 12, 2011 at 5:25 PM / IP Logged  
Ideally if you are really after top notch sound, get the midbass drivers up into the front doors. Consider a 3way component set up running passively for easy install or active for advanced install. If they are going in the rear parcel shelf, they definitely will need a enclosure around them.
Top Secret, I can tell you but then my wife will kill me.
smitcs3 
Member - Posts: 2
Member spacespace
Joined: November 12, 2011
Location: Australia
Posted: November 16, 2011 at 5:36 AM / IP Logged  
forbidden wrote:
Ideally if you are really after top notch sound, get the midbass drivers up into the front doors. Consider a 3way component set up running passively for easy install or active for advanced install. If they are going in the rear parcel shelf, they definitely will need a enclosure around them.
I have done allot of searching could you reference something that explains 3 way active setups? basically my understanding is that each speaker is power by a single channel on an amp and the processor just selects the Hz range is plays? also if i were to put the 8" mid bass drivers in the door where would i put the 6.5 speakers?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer