stereo noise

Home / the12volt's Install Bay / Car Audio / stereo noise (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

buellmc

Member - Posts: 3

Joined: December 16, 2011

Location: Georgia, United States

Posted: December 16, 2011 at 9:10 PM / IP Logged

I am having a problem with noise coming through the speakers, it is engine noise, I have added 6 gauge ground wire from battery too a junction bar and the amp, stereo, are grounded there. it gets even worst when I hook up the TV, its in a 2002 mini cooper, I have tried adding a noise aliminator but it did not help.

sbuell

i am an idiot

Platinum - Posts: 13,693

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: December 16, 2011 at 9:46 PM / IP Logged

Pioneer Deck?

buellmc

Member - Posts: 3

Joined: December 16, 2011

Location: Georgia, United States

Posted: December 16, 2011 at 9:47 PM / IP Logged

no jensen touch screen

sbuell

buellmc

Member - Posts: 3

Joined: December 16, 2011

Location: Georgia, United States

Posted: December 16, 2011 at 9:49 PM / IP Logged

also have 2. cap in-line

sbuell

i am an idiot

Platinum - Posts: 13,693

Joined: September 21, 2006

Location: Louisiana, United States

Posted: December 16, 2011 at 10:16 PM / IP Logged

If you turn the amplifier gain control all the way down, does it still have the noise?

still_walkin

Silver - Posts: 644

Joined: April 18, 2007

Location: California, United States

Posted: December 17, 2011 at 6:37 AM / IP Logged

how close are your signal wires to power wires . turn the gain down as well

1993 sdv

Alpine 4x6 6x9 5 1/4 swr-10d4

alpine v60

12.5 VGA flip down

Nettop pc w/10" touch screen

78nova

5-re audio 5x7 ,10" sub &

Xtx-500.5

"Take the faceplate off get the jumperpack"

birdman41

Member - Posts: 16

Joined: December 07, 2011

Location: Arizona, United States

Posted: December 22, 2011 at 4:16 AM / IP Logged

Are all your components grounded at the same location>? All speaker wires and rcas should run clear of power amp wire and if possible away from vehicle wiring. my only other thought is a cheap deck or amp will cause this. been there and done that.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

stereo noise

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.