Bad Distortion

Home / the12volt's Install Bay / Car Audio / Bad Distortion (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

clftn

Member - Posts: 9

Joined: June 22, 2003

Location: United States

Posted: June 27, 2003 at 10:12 PM / IP Logged

I just installed a Clarion DVD headunit and 2 sets of JL Audio speakers. The headunit had a separate amp with 18x4 watts rms. When I turn it up anymore than halfway the speakers get heavily distorted and sometimes make a popping sound. I have heard this could be caused by underpowering but I'm not sure. Also, is it possible the distortion could be coming from the power supply? The power cable is within a foot or so of the wiring harness. Any advice would be greatly appreciated.

esmith69

Gold - Posts: 1,511

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 26, 2002

Location: United States

Posted: June 27, 2003 at 10:15 PM / IP Logged

No the distortion is not coming from the power cable. The power cable itself may be too small, but I think that's not what's causing your problem. Just an overall lack of sufficient amplifier power is what's the problem. Only thing I can suggest is that if you want it up that loud you'll have to turn down the bass and treble a little bit. Or get an external 4-channel amplifier.

Ethan

-----

"Patience, persistence, and perspiration make an unbeatable combination for success"

Donate to the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Bad Distortion

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.