1979 Toyota Cressida radio

Home / the12volt's Install Bay / Car Audio / 1979 Toyota Cressida radio (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

2k2AccordEX

Member - Posts: 16

Joined: March 17, 2003

Location: Canada

Posted: August 20, 2003 at 1:23 AM / IP Logged

1979 Toyota Cressida with twin-shaft radio in it (stock 1979 Toyota radio). The opening is too small for a new DIN sized radio. What I need to know is: Are any install kits available for this car, or do I have to fabricate a faceplate from ABS plastic myself or do I have to cut out the dash opening???..........HELP

Any help at all is appreciated, thank you.

If I have an idea, and you have an idea and we share ideas, then we each have two Ideas, together we have four.

wizzle

Copper - Posts: 55

Joined: August 08, 2003

Location: Afghanistan

Posted: August 20, 2003 at 2:20 AM / IP Logged

most shaft radios need to be cut to accomodate a din sized radio. if you put the cage in front of the opening, is the gap top to bottom, larger than the cage?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1979 Toyota Cressida radio

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.