the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002 Cavalier System Set-up?


Post ReplyPost New Topic
< Prev Topic Next Topic >
cavyman 
Copper - Posts: 88
Copper spacespace
Joined: May 09, 2003
Posted: January 15, 2004 at 1:09 PM / IP Logged  
I have a 2002 chevy cavalier.  I am installing a new sound system.  At the moment I have almost everything but one amp and the head unit.  I have a question regarding the head unit.  How many pre-outs do I need?  I am looking to run one amp for the speakers(one set of components, and one set of 6x9s), the one amp for my sub.  Now my question is....Do I want three pre-outs or do I want to run everything off of a seperate crossover, the into the amps.  If you get what I am asking.  I think if I run everything off of a crossover, then I will only need one or two pre-outs(?).  I am open to suggestions.
1 plus 1 equals 2
Teamrf 
Gold - Posts: 1,031
Gold spacespace
Joined: January 13, 2004
Location: United States
Posted: January 15, 2004 at 1:35 PM / IP Logged  
Depending on what kind of crossover you use. If you are going to use a crossover you would only need two preouts. If you are going to use a sub amp on your head unit I would make sure you have a sub amp output on there.
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: January 15, 2004 at 4:03 PM / IP Logged  

If you go with an active crossover, be sure to go with a high quality one, otherwise you'll have noise induced.  An external crossover will usually give you a 3rd set of preouts, (for the sub) if your deck only has two.  I prefer to go with 3 preouts on the headunit, and use the amps' built in crossovers for simplicity's sake.  Another thing to look into is getting a 4 channel amp with line outs as well.  This would allow you to connect your sub amp even though your deck may only have 2 sets of preouts. 

cavyman 
Copper - Posts: 88
Copper spacespace
Joined: May 09, 2003
Posted: January 15, 2004 at 4:38 PM / IP Logged  

I was looking into buying a profile clarus 4 channel amp.  I had a profile for my onld subs and it did its job, plus it is very inexpensive.  This amp is 65w x 4 RMS plus it has a set of pre-outs.

1 plus 1 equals 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, November 10, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer