box and amp

Home / the12volt's Install Bay / Car Audio / box and amp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lilwayne380

Member - Posts: 10

Joined: May 30, 2004

Location: United States

Posted: June 21, 2004 at 5:13 PM / IP Logged

what is the best way to hook up a rockford fosgate punch z 10" 400w max 8 ohms 1.4" voice coil i want to know the best kind of box and how to hook it to a amp bridge or no let me know thanks

furflier

Copper - Posts: 236

Joined: June 14, 2004

Location: United States

Posted: June 21, 2004 at 5:34 PM / IP Logged

Sealed box if your looking for sq. As for connecting to an amp go bridged but you will only get 1/2 off the rms power from the amp. This is because you are using an 8ohm woofer. You would need 2 8ohm subs to get the full rms @ 4ohm's. Hope this helps

furflier

Copper - Posts: 236

Joined: June 14, 2004

Location: United States

Posted: June 21, 2004 at 5:35 PM / IP Logged

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: June 21, 2004 at 10:15 PM / IP Logged

you would need an amp that makes alot of power at 4 ohm, you get a second 8 ohm sub wire them in series and then bridge at the amp

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

customsuburb

Gold - Posts: 1,813

Joined: January 17, 2004

Location: United States

Posted: June 21, 2004 at 10:17 PM / IP Logged

Look for a 2 channel amp that outputs 300 watts continuous at 4 ohms. If you wired your sub to this amp it would give the sub 150 watts continuous.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

box and amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.