Dual Amps

Home / the12volt's Install Bay / Car Audio / Dual Amps (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Omar

Member - Posts: 1

Joined: September 14, 2002

Location: United States

Posted: September 14, 2002 at 3:21 PM / IP Logged

I have a 95 Chevy S-10 Blazer with Kenwood CD head unit, Front 51/4, Rear 61/2 Pioneers, Dash 4x6. The dash is powered by the head unit with the front and rears powered by an Eclipse 4 channel which also powers a JL 12" sub. My question is, I have a 2 channel Eclipse that I plan to add to the system to power my present sub along with another JL 12" that I purchased. How do I connect the two amps together (line level inputs)? Also, do you recommend a cap?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 14, 2002 at 3:29 PM / IP Logged

Is there not a line output on the Eclipse amplifier ? If not the Kenwood deck....does it have dual pre-outs or single ? If single just use " Y " adaptors to split the signal. Use a cap if you can afford to.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Dual Amps

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.