problems with installing autopc

Home / the12volt's Install Bay / Car Audio / problems with installing autopc (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

skilos1

Member - Posts: 1

Joined: November 05, 2002

Location: United States

Posted: November 11, 2002 at 5:57 PM / IP Logged

I have everything connected and I plugged it in to test to make sure everything was right and then I unplugged it to finish running all the wires and when i plugged it back in the unit powers up but does not display anything on the LCD. I am installing it in a 97 Tahoe. any help would be appreciated.

Nick Sarris

DeathsJester12V

Silver - Posts: 352

Joined: July 22, 2002

Location: United States

Posted: November 12, 2002 at 5:37 PM / IP Logged

ummm....Check all the connections again. than check all fuses, etc..if that still doesn't work...locate teh reset switch on the unit...reset it and try it...if that don't work...we'll try again

Đễẳ†ђş 12\/ Ĵęśŧē®™

Search for other posts by DeathsJester12V

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

problems with installing autopc

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.