the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

what is basic wiring for linear actuator?


Post ReplyPost New Topic
< Prev Topic Next Topic >
crazymodgsr 
Copper - Posts: 54
Copper spacespace
Joined: August 10, 2004
Location: United States
Posted: June 20, 2005 at 11:54 PM / IP Logged  
I am new with using linear actuators, but have a decent amount of wiring knowledge. I want to simply make a screen go from flat to about a 60 degree angle. I know I need an actuator (will make measurements for size later), but now sure exactly how it is wired to a switch to open AND close. Any suggestions?
Thanks
crazymodgsr 
Copper - Posts: 54
Copper spacespace
Joined: August 10, 2004
Location: United States
Posted: June 26, 2005 at 12:50 PM / IP Logged  
check out the pic below illustrating what I am trying to accomplish. any suggestions on the size/stroke of actuator might need. also, how is it wired to a switch?
what is basic wiring for linear actuator? -- posted image.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: June 26, 2005 at 1:06 PM / IP Logged  
You need to measure the distance from the resting point ( flat ) and the extended point ( 60 degree ) and find an actuator that will meet this distance. You will need to add limit switches on both start and stop positions and wire it into a switch or remote control ( if you want ). Most actuator's will come with instructions on how to use the actuator's in different scenarios.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
crazymodgsr 
Copper - Posts: 54
Copper spacespace
Joined: August 10, 2004
Location: United States
Posted: June 26, 2005 at 1:16 PM / IP Logged  
so I need to measure the red area? do you know how the linear actuator itself is wired to the switch ( http://www.firgelliauto.com/product_info.php?cPath=70&products_id=20) or the limit switches?
M&mfabrications 
Copper - Posts: 95
Copper spacespace
Joined: February 12, 2005
Location: United States
Posted: June 26, 2005 at 3:32 PM / IP Logged  
You will need to change the orentation of the actuator that you have shown in your diagaram unless one of your connecting points is not fixed. Looking at what you drew, both of your connecting points for the actuator are fixed and do not move in relation to the screen. If that is the case then your actuator will not be able to function.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer