Remote bass control wire routing

Home / the12volt's Install Bay / Car Audio / Remote bass control wire routing (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

The Distortion

Copper - Posts: 50

Joined: December 11, 2002

Location: United States

Posted: December 29, 2002 at 11:15 PM / IP Logged

When routing the remote bass wires for the Knob that will be installed under the dash(for the remote bass control on amplifier), where should route this cable?... alongside the power or signal wires under the carpet?

...not sure!

thanks!!

Search for other posts by The Distortion

pain_is_lov3

Member - Posts: 27

Joined: November 30, 2002

Location: United States

Posted: December 30, 2002 at 12:18 AM / IP Logged

i ran mine along with the power cables and i havent had any kind of problem.

The Distortion

Copper - Posts: 50

Joined: December 11, 2002

Location: United States

Posted: December 30, 2002 at 2:59 AM / IP Logged

It would be great if I can run it alongside of the signal wires, I have the signal wires routed in the middle of the car, I have power wires running along right side under sill plate, then my car has power wires running on both sides under sill plates from the factory.

Running it in the center alongside the signal wires is ideal because I am going to mount the knob in the left of center under the dash, it would just make routing shorter and easier...just want to make sure I wont get any noise or problems..

better safe than sorry right?:)

thank you!

pain_is_lov3

Member - Posts: 27

Joined: November 30, 2002

Location: United States

Posted: December 30, 2002 at 2:09 PM / IP Logged

right, i say go ahead if it will make it easier. It shouldnt cause any noise problems.

wvsquirrel

Gold - Posts: 1,237

This member has made a donation to the12volt.com. Click here for more info.

Joined: July 27, 2002

Location: Florida, United States

Posted: January 02, 2003 at 11:31 PM / IP Logged

I have an RF 500bd with remote bass. I ran the line (shielded RJ-11 connection, like a phone line) with my RCA's and haven't had any problems

Squirrel

"No more Cpt. Kirk chit chat"

If its too loud, then you're too old

Donate to the12volt.com

Sound Pressure

Silver - Posts: 711

Joined: March 09, 2002

Location: United States

Posted: January 03, 2003 at 12:14 AM / IP Logged

Keep it neat. keep it clean, keeping it simple is another story. Remote bass control wire routing -- posted image.

Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

The Distortion

Copper - Posts: 50

Joined: December 11, 2002

Location: United States

Posted: January 03, 2003 at 6:39 AM / IP Logged

huh?

Sound Pressure

Silver - Posts: 711

Joined: March 09, 2002

Location: United States

Posted: January 04, 2003 at 12:50 AM / IP Logged

When you slap it together most times it comes out wrong. When you take your time and seperate the wires as you are doing will make the installation go well.

Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

The Distortion

Copper - Posts: 50

Joined: December 11, 2002

Location: United States

Posted: January 04, 2003 at 8:54 AM / IP Logged

thank you, yeah I just wasn't sure what you were trying to say.

One thing I'll say is that I admire the patience of the people that do this type of work for a living...because I HATE laying cables..blahhhhhh.

LOL

ih8tktz

Member - Posts: 22

Joined: December 16, 2002

Location: Canada

Posted: January 04, 2003 at 10:56 AM / IP Logged

I have a Bd 1000.1 and I am running the "remote punch bass" wire (RJ 11 or phone line) with all my signal wires down the middle of my vehicle and the control knob is in a storage space under the arm rest in the front. I have had no noise problems at all.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.