the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

want better sound out of my system


Post ReplyPost New Topic
< Prev Topic Next Topic >
mtrchamp 
Member - Posts: 2
Member spacespace
Joined: March 29, 2007
Location: United States
Posted: March 29, 2007 at 5:33 PM / IP Logged  

ok, first of I know my system is ghetto, and not the best... but I want to get the most sound possible out of it... Here's the Car setup and The System Info

Car: 88 Prelude (all stripped, carpet, back seat, spare, etc)

System:

HU: Kenwood KDC-123

Front Speakers: Sony XPLOD 5.25"

Rear Speakers: JVC 5.25" and Visonik 6x9's ( 6x9's On outside backdeck,5.25's on the Inside of back deck)

Sub: Visonik 10" Sub (In the gap where the rear seat used to be

Amp: Visonik 300W

How Can i get more bass out of this system, I'm broke so i have to work with what I have until I have some Money... where should I position the sub? should i put the speakers somewhere else? etc... any help is greatly appreciated!

loosingmymind 
Copper - Posts: 103
Copper spacespace
Joined: August 24, 2004
Location: United States
Posted: March 29, 2007 at 8:33 PM / IP Logged  

1. Eliminate Visonik. Not shure how to make their stuff sound better at all. Sorry.

I think the Sony and Kenwood will be ok. But I would add an eq to the mix to help. Mabye something from "Audio Control".

Hope that helps out.

Dave

David Fancher
USACi World Finals 2006
4th Place SQ PRO 601+
dwarren 
Platinum - Nominee - Posts: 1,811
Platinum - Nominee spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 03, 2004
Location: California, United States
Posted: March 29, 2007 at 8:48 PM / IP Logged  
I would look at an eq at last component to a system. I find they are more for fine tuning an already solid system. Most current decks have more than enough equalization.
I agree though, that the gear you have is going to put limitations on your sound quality. A solid headunit followed by a "good" or "better" pair of components or even some high quality coaxials up front is an ideal starting point. Later you can upgrade the rears, but don't place so much emphasis on the rear. upon that a solid four channel amp will make a world of difference as compared to deck power.
As for your sub section, displacement and power will yield more bass. Power is cheaper than cone area, but another woofer makes an audible difference. Your single ten, and the level of quality will unfortunately leave most wanting more. As far as placing it or relocating it, you will have toexperiment with that.
I realize money doesn't grow on trees, so do it in phases.
mtrchamp 
Member - Posts: 2
Member spacespace
Joined: March 29, 2007
Location: United States
Posted: March 29, 2007 at 11:05 PM / IP Logged  

yea thats what i plan on doing... I ship out to basic training in 3mths after I graduate HS so i'm leaving the system as is until i get back... here's my idea for the system when i get back

Blankpunt, Sony, or Alpine, Pioneer Deck (higher end one)

2 12" 1000's

1200W amp (not sure which yet)

Replace the XPLODs with some nicer ones (i want to go 6")

Swap the visonik 6x9's with some alpines

i'll play around with the sub a little bit and see what i can get out of it, i blew a fuse yesterday so i need to get another one....


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer