BCM on 2018 Harley-Davidson Road Glide

Home / the12volt's Install Bay / Motorcycle Electronics / BCM on 2018 Harley-Davidson Road Glide

Welcome Guest :)

Members

< Prev Topic Next Topic >

pcornell1

Member - Posts: 1

Joined: May 28, 2020

Location: New Jersey, United States

Posted: May 28, 2020 at 7:35 PM / IP Logged

I'm looking to install 2 Denali Electronics D7 LED Aux lights w/ data dim, pretty simple, also looking to install 2 Denali Electronics D4 Amber w/ Data Dim, again pretty simple. Now the issue. I need to be able to shut off my headlight and running lights (all white lights) when I start driving through milk(fog). Then I can run the D4 Amber's only. The Body Control Module (BCM) I'm told cant be configured for that. Can I create a shunt to trick the BCM?

Or maybe wire in an isolation switch to DC power to headlights only if it wont trip the BCM to DC power to lights then I'm without. Any help would be greatly appreciated

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.